Showing posts with label indoor training. Show all posts
Showing posts with label indoor training. Show all posts

Sunday, June 14, 2020

Building my Roo!

"So pumped for this season because I have a new piece of equipment.  My Quintana Roo PR5 arrived this week.  I have unboxed it and assembled it as sent.  Here it is!

https://drive.google.com/uc?export=view&id=1-JrdAqfWcQHa20bR32NsPtL0FNQu2rME

Well, that was the opening to my draft blog post pre-COVID-19!  My how things changed this year.  This post was originally going to describe how I upgraded my new ride and was riding it in races by now.  Well, obviously that is not the case.

So, as I began describing several months ago, this was NOT how my QR PR5 would remain.  I saved a lot of money through my TeamZoot discount and used that savings to make some upgrades.  Shortly after I snapped these photos, I commenced my personalization of this bike to make it race ready for me.

First, I swapped out the Ultegra front brake assembly with my TriRig Omega X front brake.  I have invested so much in race wheels the last few years that I opted not to go for the disk brakes on my new bike.  When I consider a new bike build in five to ten years from now, I'll be ready to reinvest (mostly because I hope to be making more money by then, lol.) 

Next up, pedals.  I purchased a new pair of Dura-Ace PD-R9100 Pedals.  These are carbon fiber and much lighter than the Shimano pair I have on my Trek Speed Concept.  I contemplated Speedplay pedals for a long time before pulling the trigger on these pedals.  One part of my bike fit that I still have not settled on is the amount of float in my foot position.  These pedals give me the most flexibility to play with this.  Again, a future build when I am more experienced and understand my fit better, I might go with Speedplay.  Another reason here is that I do so much riding indoors that I really like the ease of use of the Shimano set-up and honestly don't want to go through the process of learning a new pedal on my brand new bike.  May be wimpy, but I am happy with this decision.

The stock cockpit of the PR5 is a 42mm aluminum base bar with aluminum Profile Design extensions.  I have a 42mm Profile Design SVET R carbon fiber base bar on my Speed Concept already.  Rather than swapping that out, I purchased a new 40mm Profile Design SVET R carbon fiber base bar and Profile Design T4 carbon fiber extensions.  This gave me more drop, makes me more aero, and also reduces the weight of the bike.  Plus, the airfoil design of the Profile Design base bar looks way better than the stock aluminum base bar from QR.  The bracket between the bars is for my Profile Design BTB bottle.



I went with Di2 on this new rig and am really excited to go to electronic shifting.  I was not willing to get crazy with an oversized pulley system so I went with the T11 Hyper Pulley Wheels from SLF Motion.  If it were not for the discount with them from TeamZoot, I may not have bothered with this upgrade.  I also decided to go with waxing my chain on a routine basis.  So far on a few training rides, I am really happy with the wax option.  It keeps things really nice and clean.


The smallest crank length QR could provide from their stock was 165mm.  I was surprised to learn when the bike arrived that I was upgraded with a Praxis crankset and an upgraded bottom bracket bearing from Praxis.  It is a nice set-up so I am going to keep this going forward in case I might want to adjust down the road.  I was fitted to 160mm cranks this fall and have been training at this length thus far with good results.  Unfortunately, a160mm crank size severely limited my options for a crank based power meter which I prefer.  Therefore, I went with the ALDU Rotor Crank Set with a 52/36 round chain rings and their new InSpider power meter.  Unfortunately, demand was very high at the time I ordered the cranks, so I had to wait eight weeks to get this and complete my build.  Again, Rotor's sponsorship of TeamZoot really helped make this decision easier.  I'll save my long story of botched bottom bracket replacements for another day!  Let's just say it took me three tries and two months for waiting for the right tools to get this upgrade completed!


So without further ado, here is my final build with the Reynolds 40mm deep wheel.  I will update the post with my Reynolds Disc on the rear and Williams 80 on the front when race day comes around.  For now, she has felt great on the training rides thus ride.  My Speed Concept remains on the trainer full time now for getting after it indoors!



Saturday, March 28, 2020

COVID-19: First Virtual Race (of the Season?)

Week 3 of the COVID-19 situation here in the US is wrapping up and there is no immediate end in sight.  Already, one race of mine was cancelled and it is very likely June races are in jeopardy.  As far as Worlds in August, it is anyone's guess.  It is highly questionable as Canada has shut their borders to international travelers until June 30th. 

So... I went ahead and threw my hat in the ring on a virtual race that I learned about through the forums at Slowtwitch.com.  Here is the link to the thread introducing PenguinMan!!  It is by far NOT an official race and is fraught with possibilities of cheating, but who cares... I needed to race!  I chose to race the duathlon because right now all pools nearby are closed.  I also chose to do the entire race in one attempt in my pain cave.  I decided that if I choke, I'll live with the results.  Fortunately, I had a decent effort for the 5k run, 20 mile bike, and 5k run.

To set things up, I needed to make sure I had an accurate method to measure my treadmill speed.  I have a Zwift foot pod, a Garmin Tri Heart Rate Strap, and of course the treadmill itself.  Over the past few years I have figured out that the best option is to just go with my Garmin 735XT and the Tri HR Strap.  However, it does vary and I figured this race would motivate me to finally invest in something more accurate.  I elected to purchase the Runn Smart Treadmill Sensor from the Zwift Store.  Here is a picture of it installed on my treadmill. 


It was so easy to set-up and to get started.  It also quickly connects to Zwift and my Garmin!  Best of both worlds now!  The beauty of this is that it actually captures top end speed on the treadmill.  My foot pod and the HR strap never seemed to really capture my pace above 9 mph on the treadmill accurately.  The Runn Smart sensor actually measures the physical speed of the belt itself so it is very precise and accurate!

Fortunately, that was the only investment needed for this race!  There was no early wake-up to travel to the race, no packet pick-up, no packing everything under the sun in case something went wrong, etc.  All I had to do was roll out of bed, get through my morning routine, warm-up in the comfort of my basement (and not in the rain outside), and get after it!! 

After warming up for ten minutes with several 30 - 40 second pick-ups, I was ready to go.  I have never tried to run a 5k time trial on a treadmill before so this was a first for me.  I knew I would not attempt a PR today, but wanted to go as close to the red line as possible.  The first mistake I made was I started the Zwift run at a dead stop on my treadmill.  So the time it took my old pal to rev up to my opening pace crushed my first mile by nearly 30 seconds per mile. This led me to push it a little harder than I had planned on the second two miles.  It felt a little like cheating that all I had to do was speed up the treadmill to negative split the run.  However, there was a lesson in that in the second run that I'll explain later.

There is a bit more to do in transition during a virtual race than a real one.  First, you have to end your run on Zwift.  I hate opening up Strava afterwards to change the name of the workout so I went ahead and labeled it appropriately, "PenguinMan Run 1".  Then, I had to dismount from the treadmill and set-up Zwift for my trainer set-up.  While I waited for the spinning circle of death to advance to the sensor screen, I woke up my trainer and put my cycling shoes on.  With that, I was connected and was able to mount up and get a course selected and start.  Unlike the treadmill, you can start hammering out of the gate when cycling.  I thought about having things set up with another device but I realized that everything would go to sleep by the time I finished the first run regardless of what I would do.  Therefore, there really would not have been much time saved. 

As I started the ride, I was hurting a little more than anticipated.  I did not taper for this effort at all (except for the fact that I have not been able to swim for nearly two weeks now!).  I was a little worried that this ride would not go well.  After about ten minutes, I was finally feeling reasonable and settled in to a nice upper Z3 effort with some Z4/Z5 pushes up some inclines.  My target power was 3.8 W / kg.  I ended up at 3.61 W / kg... not stellar but I am happy with it.  I did have some nutrition on this ride.  I used one scoop of UCAN Superstartch mixed with one scoop of Advocare Spark and water.  I was very happy that I did because the caffeine boost from the Spark really helped me push through the end of the bike and set-up the run. 

Now, T2 was much like T1 with a lot of negotiating with Zwift to get set-up on the treadmill.  I also started the treadmill at 6 mph while I was getting ready so that I was already jogging by the time I started the run.  This helped cut the time down to full speed and closed the gap with my per mile average early.  I really wanted to push hard and go sub 19 minutes on this run.  While executing it, I thought by watching the paces that I was going to get it.  Alas, it was not there.  What I didn't realize was I did not do as much increasing of the speed as I did in the first run to make up for the losses at the beginning.  Ultimately though, I pushed hard and really benefited from the treadmill pushing me to keep going.  If this was a dry-land race... I am not sure I would have been able to push mentally through the run as I did with this one.  One nice take-away for me here is that I learned mentally I can push through it. 

Overall, I am pretty happy with the results.  Here are the stats:
5k Run 1   19:08    06:09 min / mile
T1 ~3:00
20 mile Bike    50:15     23.8 mph    3.61 W/kg     515' Elevation
T2 ~3:00
5k Run 2   19:23    06:14 min / mile

TOTAL TIME: 01:34:46



After the effort, I posted my results on a website provided at registration.  On April 1st, the race director is uploading all the statistics from each registrants results into an algorithm that will virtually race everyone on a race course that he plotted out in Antarctica!  We also posted our results to Strava for validation of the data.  As a good "Zwifter", I posted pics of my before and after weight so all can know that I did not cheat my effort.  As I noted before, I am going with one complete effort and sticking with it.  There is no limit to the number of times you want to try each of the legs.  You can do them independently or together... they don't care.  However, I care... this is my one true honest race day result and I am sticking with it. 

UPDATE:
The results are in and a whopping sixteen people participated and I finished first.  I'll take it!